Airpura V600 Air Purifier

Carbon bed

• 18 lbs activated carbon, 13" x 13" x 9"
• 2" deep x 570 sq'' surface

Particle removal: 40 sq ft true HEPA (Measured 1 side only, 10 pleats per inch. Pleats warm rolled with separators

Air Flow: 560 CFM

Pre-filter: 570 sq in x 1in

Housing: Powder coat steel

Size: 23" x 15"

Weight: 45 lbs total

Voltage Options: 115 or 220 volts

Watts: 120 on high 40 on low

Sound Level

• 28.1 db on low (at 6 feet)
• 62.3 db on high (560 cfm)
• (Room Level 25.1)

ELT Certified

Conforms to CSA C22.2 no 113, ANSI / UL 507

Coconut Bend Carbon Helps with:

• Formaldehyde from furniture, carpets
• Ammonias from cleaning materials
• Pesticides tracked in from outdoors
• Benezene, toulene from heating fuels, paints and glues
  

All metal housing ensures no plastic vapors are emitted

Felt gaskets seal the filter chamber. Maximize filtration with no rubber off-gassing found with other filters

Variable speed motor lets you choose your ideal level of filtration

Motor out of the air flow. Most air purifiers blow the clean air over the motor and pick up fresh impurities

Unimpeded airflow simple and direct internal airflow avoids the air turbulence, inefficiency and noise associated with more convoluted systems

Pressure seal:Airpura's unique pressure seal on the filter chamber ensures that all of the dirty air passes through the filters. Other systems allow leakage and do not achieve the 99.97% HEPA filtration rating

Perforated steel exterior offers both a softer appearance and 360 degree air intake and distribution.

Separate electrical parts chamber prevents any off gassing from capacitors, condensers or switches.

Backward curved motorized impeller eliminates the vibrations and noise associated with older motor and shaft set ups

Separately changeable filters The Hepa and carbon filters can be changed separately so you only change them when appropriate and save operating costs

Activated Carbon: Used in water filtration and in military gas masks, it can adsorb 60 % of it's own weight of airborne chemicals

True HEPA Flters: Developed by the atomic energy commission to filter radio active particles as small as 0.3 microns

Cleanable pre-filter: Vacuum through grill and change every 12 months

Where the Airpura Air Purifier is used for Private or Residential purposes the following warranty applies. The determination of the type of use is made exclusively by Airpura Industries inc.

If within five (5) years from the date of the original purchase by the end-user from the Authorized Dealer, an Airpura R600, C600, T600, H600, V600 or UV600 (with the exception of filters or UV lamps) is proved to be defective by reason only of faulty workmanship or materials, Airpura Industries Inc. Will, at their option, repair or replace the part or product free of charge for labor and materials.

If within ten (10) years from the date of the original purchase by the end-user from the Authorized Dealer, an Airpura R600, V600 or UV600 (with the exception of filters or UV lamps) is proved to be defective by reason only of faulty workmanship or materials, Airpura Industries Inc. will at their option repair or replace the part or product free of charge for labor only. Any replacement parts deemed necessary by Airpura Industries will be charged to the purchaser.

The same warranty applies to the Airpura I-600 within two (2) years of purchase for parts and labor and within 5 years for labor only.

Obvious defects must be communicated to the Authorized Dealer within 10 days from the purchase date.

This warranty shall not apply to damage caused through misuse, wear and tear, neglect, unauthorized repair or to damage caused through installation, adaptation, modification or use in an improper manner or inconsistent with Airpura’s operating and maintenance instructions, wear or deterioration due to environmental conditions or to damage occurred during transit.

Airpura Industries will not be liable under this warranty for any fault or damage arising from defective workmanship, if the product has been serviced, repaired or modified by any person other than Airpura Industries Inc. or the manufacturer’s serial label has been removed or tampered with.

All products returned for service or repair must be accompanied with a RA (Return Authorization) number. The RA number must be clearly visible on the external packaging. The absence of an RA number will delay the service or repair process, for any shipment to Airpura Industries Inc. not accompanied with a RA number will not be accepted or will be immediately sent back to the shipper. Please contact Airpura Industries Inc to receive a RA number prior to shipment.